NSN 5905-01-285-5488 (5905012855488) Listing

Alternative NSN: 5905-01-285-5488

Item Name: Resistor Variable Wire Wound Pre

FSG: 59 Electrical and Electronic Equipment Components

Federal Supply Class (FSC): 5905 Resistors

NCB Code: USA (01)

Manufacturers: Ametek Inc, General Dynamics Global Imaging, Sensor Systems Inc, Servo Instrument Corporation

Browse NSN parts of NSN 5905-01-285-5488 and get lowest price for your requested parts in 15 minutes. Just ordered part of NSN 5905-01-285-5488 like 4289, 4289, 5839K70P004, 5839K70P004, 741-6508 described as Resistor Variable Wire Wound Pre from industry leading manufactures such as Sensor Systems Inc, General Dynamics Global Imaging, Ametek Inc, Servo Instrument Corporation. We are proud to offer an inventory of over 2 billion ready-to-ship parts, 24/7 availability, and key locations in the U.S./abroad. These attributes allow us to meet all aircraft on ground (AOG) requirements with ease.

Part Number's List for NSN 5905-01-285-5488, 5905012855488

Part No	Manufacturer	Item Name	QTY	RFQ
4289	Sensor Systems Inc	resistor variable wire wound pre	Avl	RFQ
4289	General Dynamics Global Imaging	resistor variable wire wound pre	Avl	RFQ
5839K70P004	Ametek Inc	resistor variable wire wound pre	Avl	RFQ
5839K70P004	Sensor Systems Inc	resistor variable wire wound pre	Avl	RFQ
741-6508	Servo Instrument Corporation	resistor variable wire wound pre	Avl	RFQ

Product Specification of NSN 5905012855488

MRC	Criteria	Characteristic
AAPN	SECTION QUANTITY	2
AAQL	BODY STYLE	CYLINDRICAL SERVO MOUNTED
AARG	RELIABILITY INDICATOR	NOT ESTABLISHED
AAVL	PILOT DIAMETER	0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPA	UNDERCUT DIAMETER	0.975 INCHES MAXIMUM
ABPC	UNDERCUT WIDTH	0.0570 INCHES MINIMUM
ABPM	BODY DIAMETER	1.125 INCHES MAXIMUM
ABWV	SHAFT DIAMETER	0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM
ABXF	SHAFT LENGTH	0.656 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
ADAQ	BODY LENGTH	1.250 INCHES MAXIMUM
AECZ	MOUNTING LIP DIAMETER	1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM
AEDA	MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDX	SHAFT STYLE	ROUND, SLOTTED
AEDZ	SHAFT BEARING TYPE	BEARING
AEFD	ACTUATOR TYPE	SINGLE SHAFT
AEFK	MAXIMUM STARTING TORQUE	0.30 INCH-OUNCES
AEFL	MAXIMUM RUNNING TORQUE	0.30 INCH-OUNCES
AFJN	FRAGILITY FACTOR	MODERATELY RUGGED
AGAV	END ITEM IDENTIFICATION	SPEC PROJ ERA
APXH	TERMINAL LOCATION	RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGY	MOUNTING METHOD	CLAMP RING
CBME	III CUBIC MEASURE	1.243 CUBIC INCHES
CQGN	AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 ALL SECTIONS
CRFJ	TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-20.0/+20.0 ALL SECTIONS
CRSX	ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
TEST	TEST DATA DOCUMENT	97424-5839K70 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW

Browse More NSN for 5905-01-285-5488, 5905012855488

5905-00-001-2971 (5905000012971)	5905-00-001-3031 (5905000013031)	5905-00-001-3050 (5905000013050)
5905-00-001-3085 (5905000013085)	5905-00-001-3197 (5905000013197)	5905-00-001-3806 (5905000013806)
5905-00-001-3819 (5905000013819)	5905-00-001-3821 (5905000013821)	5905-00-001-3822 (5905000013822)
5905-00-001-3824 (5905000013824)	5905-00-001-3825 (5905000013825)	5905-00-001-3827 (5905000013827)