Part Number: CR597308 | Manufacturer: Applied Industrial Technologies Inc |
NSN : 5330-01-557-7603 (5330015577603) | Item Name : seal plain |
CAGE Code: Z0GL9 | FSC : 5330 Packing and Gasket Materials |
Would you like to obtain a quick quote for Applied Industrial Technologies Inc (Cage Code Z0GL9) Part Number CR597308, Seal Plain with NSN 5330015577603? it's just a few steps away! Simply complete the form in its entirety, and we will promptly reply with a quote within 15 minutes. This is an excellent opportunity to get the quick quote for CR597308, so take advantage of it right away.
“*” Symbols for mandatory fields
ASAP Buying - an ASAP Semiconductor owned website is a leading resource to purchase national stock numbers. We have over 26 categories of distinct federal supply codes like 5330 Packing and Gasket Materials for above part number for over 10 million national stock numbers including 5330015577603 from over 5,000 leading NSN manufacturers. Competitive prices, expedited shipping with a world class quality control and export compliance protocol are the hallmarks of our service.
A knowledgeable sale representative will contact you within 15 minutes with a quote for your required part CR597308. Please feel free to call us on +1-714-705-4780 24/7 or email your Bill of Materials (BOM) to sales@asapbuying.com
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5330-01-557-7603 Item Description: SEAL,PLAIN | 5330 | 015577603 | P | |||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
CR597308 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
FEAT | Special Features | SKF AXIAL CLAMP SEALS ARE PRODUCED IN THREE DIFFERENT DESIGNS:CT1, CT3, AND CT4 DESIGN; THESE AXIAL CLAMP SEALS ARE MADE OF APPROPRIATELY PROFILED STRIPS OF NON-REINFORCED NITRILE RUBBER WHICH ARE HELD FIRMLY IN PLACE BY STAINLESS STEEL SCREW-TYPE CLAMPS; THEY ARE AVAILABLE IN THE DIAMETER RANGE 150 TO 4600 MM; THE SEALS DO NOT ROTATE BUT SEAL AXIALLY AGAINST A ROTATING COUNTERFACE; CT3 DESIGN:THE SEALS OF THE CT3 DESIGN DIFFER FROM THOSE OF THE CT1 DESIGN ONLY IN THE FORM OF THE SEALING LIP; THIS IS AGAIN FLAT BUT IS PROVIDED WITH ANNULAR GROOVES; THESE SERVE TO TRAP CONTAMINANTS WHICH MAY HAVE STARTED TO PENETRATE THE LIP/COUNTERFACE CONTACT; THE MAXIMUM OPERATING INTERFERENCE FOR THESE SEALS IS +4,8 MM; SHAFT:42.500 IN.; OD:43.688 IN.; WEIGHT:4.250 LBS |
CPCW | Housing Bore Diameter | 0.937 INCHES NOMINAL |
CXCY | Part Name Assigned By Controlling Agency | AXIAL CLAMP SEALS CT3 DESIGN |
MRC | Decoded Requirement | Clear Text Reply |
ADUC | Seal Width | 1.125 INCHES NOMINAL |
Before You Go, Why Don’t You Take a Look at Our Aviation Parts Catalog.
Request for Quote